Design of an Earthquake Early Warning System Based on Vibration Sensors and IoT in Earthquake-Prone Areas of Bengkulu
DOI:
https://doi.org/10.37012/jtik.v12i2.3830Abstract
Bengkulu Province is one of the regions in Indonesia with a relatively high level of earthquake vulnerability due to its location in a tectonic plate boundary zone. This condition highlights the importance of a system capable of providing early warnings so that people can increase their awareness when an earthquake occurs. This study aimed to design and develop an Internet of Things (IoT)- and vibration sensor-based earthquake early warning system using an MPU6050 sensor to detect vibrations and an Arduino Uno as the main system controller. The method used in this study was the Waterfall model, which consists of the stages of requirements analysis, system design, implementation, testing, and maintenance. The system was developed using an MPU6050 sensor, Arduino Uno, a 16 × 2 LCD, an LED, and a buzzer. Acceleration data along the X, Y, and Z axes were processed using resultant acceleration calculations to obtain the total acceleration value. The measurement results were then compared with a threshold value of 15 m/s². When the measured value exceeded the threshold, the system displayed the message "EARTHQUAKE!!!" on the LCD and activated the LED and buzzer as warning indicators. The test results showed that the system was able to detect changes in vibration effectively and distinguish between normal conditions and high-vibration conditions based on the predetermined threshold value. When the acceleration value was below 15 m/s², the system displayed a safe status and the warning indicators remained inactive. Conversely, when the acceleration value exceeded 15 m/s², the LED and buzzer were activated as warning indicators.
Downloads
Published
Issue
Section
Citation Check
License
Copyright (c) 2026 Ahmad Bintang Akbar Salsabilla, Sastya Hendri Wibowo, Yulia Darmi, Muntahanah

This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Teknologi Informatika dan Komputer allows readers to read, download, copy, distribute, print, search, or link to the full texts of its articles and allow readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions Authors are allowed to archive their submitted article in an open access repository Authors are allowed to archive the final published article in an open access repository with an acknowledgment of its initial publication in this journal.

Jurnal Teknlogi Informatika dan Komputer is licensed under a Creative Commons Attribution 4.0 International License.









